|
|
|
| Ball Valves |
Top Entry, Side Entry, Two piece or Three Piece Design
API 6D and API 6A
Floating Ball
Trunnion Mounted Size
Range 1" to 48" (Metric sizes available)
Cyrogenic Service or High Temperature application |
|
|
| Maitech International Inc. supplies
floating ball or trunnion mounted design ball valves using a full range of
carbon, alloy and stainless steel materials. The ball valves are
built to easily accept pneumatic, electric, hydraulic or gas-over-oil
actuators. Break-away and run torque, which normally affect actuator
sizing, are minimized to allow for economical actuator packages. Actuated
ball valves will be supplied under the factory warranty.
All Ball valves will be supplied
with Blowout proof stems and anti-static devices. The trunnion mounted
ball valves are supplied to facilitate block and bleed applications.
|
| Applicable Codes: |
|
API 6D, API 6A ANSI B16.34, BS 5351. |
|
| Construction: |
|
Trunnion Mounted Side Entry.
Trunnion Mounted Top Entry.
Floating Ball Type.
Buried, Above Ground Service. |
|
| Bore: |
|
Full Port, Reduced Port or Venturi type |
|
| Materials: |
|
Carbon Steel
Stainless Steel
Duplex
Stainless Steel - Alloy 20.
Inconel
cladding
Metal-to-Metal Seat. |
|
| Pressure Rating: |
|
ANSI 150 - 300 - 600 - 900 - 1500 - 2500.
API 2000 - 3000 - 5000 - 10000. |
|
| Temperature Range: |
|
From -320° to +750°F
Also available for cryogenic and corrosive services. |
|
| Fire Safe: |
|
BS 6755, API RP 6 FA, API 607. |
|
|
|
|
|
